Projects Portfolio
This is a detailed list of all the projects I've worked on so far, it includes my hackathon submissions, side tinkers, failed startup ideas, and non-profits
Vaccine Lad
June 2021
Microproject
A Telegram Bot that performs the cron job of checking the CoWIN API Endpoints for any open vaccine slots. Built during the time of COVID-19 vaccines shortage in Delhi in the hopes of automating the appointment process.
Gyaan Academy
September 2020
Hackathon Submission
Amartya, Kataria and I built this startup idea ground up in 72 hours for arguably, Delhi's most prestigious interschool hackathon - MINET X. The idea is an 'Online School' with smart features including building a network.
Sanskriti MUN 2020 Webapp
January 2020
Webapp
I developed the webapp for Sanskriti Model UN Conference of 2020. This, in no way is a favourite project, I just want to use this platform to express my heartfelt 🖕 towards SMUN ❤️.
Alexation
June 2019
Microproject
Not very original, but this project eliminated the need of a central Alexa hub by creating an ecosystem using NodeMCU. It brings down the cost of automation from $20 to $3 per device.
ARKAtype
May 2021
Hackathon Submission
3 friends and I participated in a hackathon organized by Reply Challenges, the goal was to redesign an airline service. We didn't make it to the top 3 but the experience was a lot of fun and introduced me to Figma.
VKYD
July - September 2020
Failed Startup
VKYD was the collective effort of 3 of my friends and me fueled by our passion for streetwear. The goal was to make streetwear sustainable while keeping small businesses in the loop.
Lunatix
October 2019
Hackathon Submission
A project that Raghav Sarangi, Kartik Gupta and I worked on for an IT event - Exun 2019. This was an idea documentation that aimed at agricultural development on the lunar surface.
Arduino Drumpads
August 2017
Microproject
I designed e-drums while eliminating the MIDI and laptop requirements that require close to none setup and make it more cost-effective.
CovAID
April 2021
Emergency service
4 friends and I co-founded CovAID to provide personally verified leads to all COVID-19 resources in real-time through brute-force calling with an organised team of 40 volunteers in under 48 hours.
Eyena
May 2020
Concept Documentation
Eyena is an IoT based smart mirror that measures your body temperature upon detecting your presence without any physical contact. The project wasn't economically feasible with the then available technology, hence I had to postpone it indefinitely.
BinaryBox
September 2019
Hackathon Submission
A subscription-based STEM Kits delivery service model that Kartik Gupta and I developed for an IT event.
Anet A8 3D Printer
December 2016
Microproject
I designed and assembled this Anet A8 inspired 3D printer with a 0.5mm X-Y-Z slicing precision and 22cm cube printing volume.
Vaccine Lad
June 2021
Microproject
A Telegram Bot that performs the cron job of checking the CoWIN API Endpoints for any open vaccine slots. Built during the time of COVID-19 vaccines shortage in Delhi in the hopes of automating the appointment process.
CovAID
April 2021
Emergency service
4 friends and I co-founded CovAID to provide personally verified leads to all COVID-19 resources in real-time through brute-force calling with an organised team of 40 volunteers in under 48 hours.
VKYD
July - September 2020
Failed Startup
VKYD was the collective effort of 3 of my friends and me fueled by our passion for streetwear. The goal was to make streetwear sustainable while keeping small businesses in the loop.
Sanskriti MUN 2020 Webapp
January 2020
Webapp
I developed the webapp for Sanskriti Model UN Conference of 2020. This, in no way is a favourite project, I just want to use this platform to express my heartfelt 🖕 towards SMUN ❤️.
BinaryBox
September 2019
Hackathon Submission
A subscription-based STEM Kits delivery service model that Kartik Gupta and I developed for an IT event.
Arduino Drumpads
August 2017
Microproject
I designed e-drums while eliminating the MIDI and laptop requirements that require close to none setup and make it more cost-effective.
ARKAtype
May 2021
Hackathon Submission
3 friends and I participated in a hackathon organized by Reply Challenges, the goal was to redesign an airline service. We didn't make it to the top 3 but the experience was a lot of fun and introduced me to Figma.
Gyaan Academy
September 2020
Hackathon Submission
Amartya, Kataria and I built this startup idea ground up in 72 hours for arguably, Delhi's most prestigious interschool hackathon - MINET X. The idea is an 'Online School' with smart features including building a network.
Eyena
May 2020
Concept Documentation
Eyena is an IoT based smart mirror that measures your body temperature upon detecting your presence without any physical contact. The project wasn't economically feasible with the then available technology, hence I had to postpone it indefinitely.
Lunatix
October 2019
Hackathon Submission
A project that Raghav Sarangi, Kartik Gupta and I worked on for an IT event - Exun 2019. This was an idea documentation that aimed at agricultural development on the lunar surface.
Alexation
June 2019
Microproject
Not very original, but this project eliminated the need of a central Alexa hub by creating an ecosystem using NodeMCU. It brings down the cost of automation from $20 to $3 per device.
Anet A8 3D Printer
December 2016
Microproject
I designed and assembled this Anet A8 inspired 3D printer with a 0.5mm X-Y-Z slicing precision and 22cm cube printing volume.
Vaccine Lad
June 2021
Microproject
A Telegram Bot that performs the cron job of checking the CoWIN API Endpoints for any open vaccine slots. Built during the time of COVID-19 vaccines shortage in Delhi in the hopes of automating the appointment process.
ARKAtype
May 2021
Hackathon Submission
3 friends and I participated in a hackathon organized by Reply Challenges, the goal was to redesign an airline service. We didn't make it to the top 3 but the experience was a lot of fun and introduced me to Figma.
CovAID
April 2021
Emergency service
4 friends and I co-founded CovAID to provide personally verified leads to all COVID-19 resources in real-time through brute-force calling with an organised team of 40 volunteers in under 48 hours.
Gyaan Academy
September 2020
Hackathon Submission
Amartya, Kataria and I built this startup idea ground up in 72 hours for arguably, Delhi's most prestigious interschool hackathon - MINET X. The idea is an 'Online School' with smart features including building a network.
VKYD
July - September 2020
Failed Startup
VKYD was the collective effort of 3 of my friends and me fueled by our passion for streetwear. The goal was to make streetwear sustainable while keeping small businesses in the loop.
Eyena
May 2020
Concept Documentation
Eyena is an IoT based smart mirror that measures your body temperature upon detecting your presence without any physical contact. The project wasn't economically feasible with the then available technology, hence I had to postpone it indefinitely.
Sanskriti MUN 2020 Webapp
January 2020
Webapp
I developed the webapp for Sanskriti Model UN Conference of 2020. This, in no way is a favourite project, I just want to use this platform to express my heartfelt 🖕 towards SMUN ❤️.
Lunatix
October 2019
Hackathon Submission
A project that Raghav Sarangi, Kartik Gupta and I worked on for an IT event - Exun 2019. This was an idea documentation that aimed at agricultural development on the lunar surface.
BinaryBox
September 2019
Hackathon Submission
A subscription-based STEM Kits delivery service model that Kartik Gupta and I developed for an IT event.
Alexation
June 2019
Microproject
Not very original, but this project eliminated the need of a central Alexa hub by creating an ecosystem using NodeMCU. It brings down the cost of automation from $20 to $3 per device.
Arduino Drumpads
August 2017
Microproject
I designed e-drums while eliminating the MIDI and laptop requirements that require close to none setup and make it more cost-effective.
Anet A8 3D Printer
December 2016
Microproject
I designed and assembled this Anet A8 inspired 3D printer with a 0.5mm X-Y-Z slicing precision and 22cm cube printing volume.